HERMA rPE PCR transparent (866)
Recycling Polyethylen film transparent, with corona pretreatment
Technical data
| Grammage | approx. 61 g/m² | ISO 536 |
| Caliper | approx. 65 µm | ISO 534 |
| Tensile stress MD | approx. 22 N/mm² | ISO 527 |
| Tensile stress CD | approx. 21 N/mm² | ISO 527 |
Application and use
The corona pretreated surface of HERMA rPE PCR transparent (866) offers a good print quality in conventional printing techniques. Before printing we recommend to refresh the corona pretreatment.
This recycled film contains gel particles. The number and size depends on the quality of the post consumer recyclate (PCR) and can therefore vary. Depending on the size and shape of the gel particles, there may be variations in ink acceptance. It may therefore be necessary to adjust the printing and die-cutting process. Due to the production from post consumer recyclate, variations in ink adhesion are also possible. In this case, we recommend using a primer. This recycled film is also suitable for thermal transfer printing. Pre-testing is recommended. HERMA rPE PCR transparent (866) is perfect for the production of very demanding labels that underline the recycling design and are preferably used on PE surfaces.
The content of plastic recyclate from post-consumer recyclate (PCR) is ≥ 98%. The masterbatches and additives added during film production, such as white pigments, anti-blocking agents or processing aids, are not counted as recyclates. Therefore the total content of recyclates is always < 100%. PCR materials may have a stronger inherent odour than virgin PE materials.
Recommended storage
See HERMA website: www.herma.com/material/storage-conditions/
Disclaimer
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0
Solicitar una muestra
Simplemente solicite su muestra del producto usando nuestro formulario.
