Permanent adhesive, acrylic based
|Peel adhesion||very high|
|Minimum application temperature||-20 °C|
|Service temperature||-40 °C to +80 °C|
Adhesive - Issue 12.2019PDF download
Application and use
The PSA 63Vst is characterized by an extraordinary high tack. Even on critical surfaces tack-level is very high. 63Vst is therefore ideal for cool, moist and even slightly greasy surfaces. Despite the excellent low temperature properties, it indicates very good mandrel-hold and is therefore suitable for curved surfaces and irregular 3D packaging.
Once labelled 63Vst is highly waterproof.
Excellent die-cutting characteristics on all customary machines.
Storage conditions and shelf life
Storing at a temperature of 20 ± 5 °C, a relative humidity of 45 ± 5 % and a dark storage is recommended. Moisture, heat and direct sunlight have to be avoided.
The shelf life up to 4 years from date of production (belongs to face material).
Regulations concerning contact with food
All ingredients of adhesive 63Vst comply with recommendations BfR XIV or FDA 21 CFR 175.105 (Adhesives).
The adhesive 63Vst according to the sample material submitted may be used safely for the reverse coating of labels for the labelling of foodstuffs for a storage at room temperature and below. It may stand in direct contact with dry, moist and such kind of fatty food-stuffs to which a correction factor of at least 2 can be applied according to the Regulation (EU) No 10/2011.
Furthermore, the adhesive may be used for laminating various materials. In this case, the seams may safely come into direct contact with foodstuffs.
The labels may also be used for the labelling of blood bags. (The certificate of compliance is valid until December 18, 2021)
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0, Fax +49 (0) 711 7702-381