HERMA PO Laser (801)
White, matt, filled polyolefin film, suitable for laser printers
Technical data
| Grammage | approx. 110 g/m² | ISO 536 |
| Caliper | approx. 110 µm | ISO 534 |
| Tensile stress MD | approx. 33 N/mm² | ISO 527 |
| Tensile stress CD | approx. 24 N/mm² | ISO 527 |
| Opacity | approx. 88 % | ISO 2471 |
Application and use
HERMA PO Laser has been specially designed for laser printers. Printing tests showed excellent results both with monochrome and colour laser printing.
In combination with suitable inks the matt surface of HERMA PO Laser offers an excellent quality of imprint with all customary printing methods.
Label sheets produced from HERMA PO Laser are particularly suitable for product marking (e.g. for labelling pallets or barrels).
In combination with our acrylic adhesives 64B and 64Z this film complies with the requirements of BS5609/II (resistance to seawater).
Recommended storage
See HERMA website: www.herma.com/material/storage-conditions/
Disclaimer
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0
Solicitar una muestra
Simplemente solicite su muestra del producto usando nuestro formulario.
