Adhesive 62P
Permanent adhesive, acrylic based, water removable
Technical data
| Tack | high | |
| Peel adhesion | high | |
| Shear | low | |
| Minimum application temperature | -10 °C | |
| Service temperature | -20 to 50 °C |
Application and use
The adhesive 62P is designed for applications where the label has to be removed without residue. Good results can be reached from 35 °C.
The washing time depends on the label material, the substrate on which the label is applied, the printing and the washing parameters as water temperature, water pressure and the used washing additives.
The adhesive shows good results on PE and PP reusable boxes and buckets, which are also used at low temperatures.
Storage conditions and shelf life
Storing at a temperature of 20 ± 5 °C, a relative humidity of 45 ± 5 % and a dark storage is recommended. Moisture, heat and direct sunlight have to be avoided.
Regulations concerning contact with food
The adhesive 62P may be used safely for the reverse coating of labels for the labelling of food stored at room temperature and below. It may stand in direct contact with dry, non-fatty food, provided that the ratio of the contact surface of the label related to the total weight of the food does not exceed 0,1 dm²/kg. (Declaration of no objection valid until 05.05.2027).
Disclaimer
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0
Solicitar una muestra
Simplemente solicite su muestra del producto usando nuestro formulario.
