HERMA PETP white matt XT (944)
White, matt polyester film with topcoat
Technical data
| Grammage | approx. 77 g/m² | ISO 536 |
| Caliper | approx. 55 µm | ISO 534 |
| Tensile stress MD | approx. 130 N/mm² | ISO 527 |
| Tensile stress CD | approx. 150 N/mm² | ISO 527 |
| Opacity | approx. 86 % | ISO 2471 |
Application and use
Thanks to its special treatment the matt surface of HERMA PETP white matt XT offers an excellent print quality in conventional printing methods.
The film may also be printed with laser and thermal transfer printers and it is possible to write on the film with ballpoint pens, pencils etc.
HERMA PETP white matt XT is perfect for production of labels that have to be resistant to high temperature and moisture surroundings (e.g. type plates).
UL Approval
This material is listed by UL in combination with adhesive 63B under:
- MH26322 ("Marking and Labeling System Materials Component" PGGU2)
- MH26322 ("Marking and Labeling System Materials - Certified for Canada" PGGU8)
- MH26479 ("Printing Materials - Component" PGJI2)
- MH26479 ("Printing Materials Certified for Canada - Component" PGJI8)
Recommended storage
See HERMA website: www.herma.com/material/storage-conditions/
Disclaimer
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0
Solicitar una muestra
Simplemente solicite su muestra del producto usando nuestro formulario.
