Adhesive 92K
Permanent adhesive, rubber based
Technical data
| Tack | very high | |
| Peel adhesion | high | |
| Shear | medium | |
| Minimum application temperature | -20 °C | |
| Service temperature | -40 to 50 °C |
Application and use
Adhesive 92K has been specially developed for deep-freeze applications. Initial tack on frozen surfaces of -20°C is excellent. Adhesion is equally good on damp surfaces. With ambient temperatures, both initial tack and final adhesion are excellent on unpolar surfaces such as PE and PP films.
Processing
Good die-cutting characteristics on all usual machines. Excellent printability with UV printing inks.
Storage conditions and shelf life
Storing at a temperature of 20 ± 5 °C, a relative humidity of 45 ± 5 % and a dark storage is recommended. Moisture, heat and direct sunlight have to be avoided.
Regulations concerning contact with food
All ingredients of adhesive 92K comply with recommendation FDA 21 CFR 175.105 (Adhesives).
Disclaimer
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0
Solicitar una muestra
Simplemente solicite su muestra del producto usando nuestro formulario.
