HERMAtyvek® (927)
White, durable nonwoven, 100 % polyethylene fibres, extremely resistant to tearing
Technical data
| Grammage | approx. 75 g/m² | ISO 536 |
| Caliper | approx. 205 µm | ISO 534 |
| Tensile stress MD | approx. 38 N/mm² | ISO 527 |
| Tensile stress CD | approx. 38 N/mm² | ISO 527 |
| Opacity | approx. 97 % | ISO 2471 |
Application and use
The surface of HERMAtyvek® offers an good printing quality in conventional printing methods like e.g. flexo, screen and offset printing. We recommend special inks with a low content of solvents (< 3 %). UV inks are also possible. HERMAtyvek® requires stronger pression than paper of the same thickness. The polyethylene nonwoven is conditionally printable with thermal transfer and matrix printers.
HERMAtyvek® is highly resistant to weather and chemicals and thus suitable for outdoor applications, e.g. drum and container labelling. It is so robust and durable that it easily withstands even the toughest conditions. The properties of HERMAtyvek® remain unchanged even at extremely low temperatures. When processing/using the material in applications with high tension, the temperature should not exceed +80 °C.
HERMAtyvek® is also suitable for labels requiring a high tear resistance and durability. The PE nonwoven is 100 % recyclable. For recycling reasons, these labels are preferably used on PE surfaces.
Recommended storage
See HERMA website: www.herma.com/material/storage-conditions/
Regulations concerning contact with food
HERMAtyvek® (927) has no food approval. On request we will be pleased to offer you a suitable Tyvek® quality for applications with food contact or for sterile applications.
Disclaimer
All statements, technical information and recommendations regarding HERMA products are given in good faith and are based on tests that we believe to be reliable, but do not constitute a guarantee or warranty. We give no guarantee as to the suitability of the product for a specific application, this should be tested by the user. Unless otherwise agreed in writing, we only accept liability within the scope of our General Terms and Conditions of Delivery and Payment.
HERMA GmbH, Adhesive Material Division, 70791 Filderstadt, Phone +49 (0) 711 7702-0
Solicitar una muestra
Simplemente solicite su muestra del producto usando nuestro formulario.
